Categories

False alarms and system glitches can be frustrating, and even more concerning, could prevent your security system from working the way it should. Fortunately, most problems, from dead batteries to false alarms, are simple to correct. Take a look at our suggestions for troubleshooting your home alarm system in Newark. We’ll help you keep your family members protected and your system operating as it should.

Test Your Home Security System In Newark

One great way to troubleshoot your property’s security is to test it yourself! Newer systems let you place them in test mode to prevent you from triggering an emergency call. Once you’re in test mode, follow these steps:

• Arm your system as you would when you leave.
• Open a door or window that uses a contact sensor, or try to trigger another sensor. Close the window or door once you’re finished so it doesn’t trigger the alarm as you switch the system back on.
• Permit the alarm to go off for 60 seconds to ensure communications with the security provider and to make an entry in the alarm system log.
• Proceed to test sensors as you wish
• Review the systems’s activity log to confirm that everything’s working.

No need to worry, monitoring professionals will be able to see that your system is undergoing a test. Just be sure to turn test mode off when done. It’s a good idea to test every other month or whenever you change your home’s internet or phone service.

Inspect The Placement And Condition Of Motion Sensors

Although an integral aspect of your alarm system, motion detectors are well known for false alarms. Prevent them with some basic troubleshooting.

• Conduct a visual check. Is there anything that could move within the sensor’s detection area, like a curtain caught in a breeze?
• Is the sensor covered in dust? Grime, dirt, and cobwebs can result in poor performance. Check to confirm the device is clean.
• Does the motion detector come with pet immunity you can enable? Some sensors can be configured to ignore pets weighing up to 100 pounds.
• When was the battery last replaced? Low batteries might affect performance or lead to false alarms.
• Is a heat source impairing the sensor? Excessive heat from sunlight or a fireplace can set off an alarm.

Keep Batteries On Hand And Watch Out For Low Battery Warnings

One of the great advantages of modern home security systems is that they’ll let you know when batteries are getting low. If your system has a app or control panel, you’ll typically see alerts there. Depending on your alarm, you might notice an occasional beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless components have batteries that will have to be replaced every so often. It’s best to keep batteries ready and establish a replacement schedule. Top systems also include a rechargeable backup battery for the main control panel. This battery keeps your system functioning if you lose power and should recharge once power is back online. If it doesn’t recharge, you will have to replace it.

Troubleshooting Is Simple With ADT Home Security In Newark 

As the top name in home security, ADT builds systems that provide unrivaled functionality and protection. Switching to test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always receive notifications when a battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Newark home. Call (973) 320-7894 or submit our form today!